Descargar Archivo

Bajarse la última versión, es este caso es el siguiente:
      • m9100-s5ek9-mz.8.1.1.bin
      • m9100-s5ek9-kickstart-mz.8.1.1.bin

Copiar configuración

Copiar la configuración de la running a la startup
MDS-A(config-vsan-db)# copy running-config startup-config
[########################################] 100%
Copy complete.

BootFlash

Este comando copia la configuración en ejecución en el bootflash, lo que garantiza que hay una copia de seguridad.
También sirve para comprobar que el bootflash no es solo de lectura (Que ocurra esto es muy poco probable).
MDS-A(config-vsan-db)# copy running-config bootflash:MDS9148S-A-6-7-17.cfg
Copy complete, now saving to disk (please wait)...

Ahora copiaremos el archivo generado a un TFTP
MDS-A(config-vsan-db)# copy bootflash: tftp:
Enter source filename: MDS9148S-A-6-7-17.cfg
Enter hostname for the tftp server: 172.25.99.111
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
Copy complete.

Salvar Firmware actual

Es importante tener el firmware que tiene actualmente el MDS por si ocurre algo. Si por algún casual no se dispone, puede salvarlo de la siguiente manera:

Verificar la versión que tiene actualmente el MDS:
MDS-A(config-vsan-db)# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
BIOS: version 2.1.17
loader: version N/A
kickstart: version 6.2(9)
system: version 6.2(9)
BIOS compile time: 01/08/14
kickstart image file is: bootflash:///m9100-s5ek9-kickstart-mz.6.2.9.bin
kickstart compile time: 6/3/2014 1:00:00 [07/11/2014 17:47:38]
system image file is: bootflash:///m9100-s5ek9-mz.6.2.9.bin
system compile time: 6/3/2014 1:00:00 [07/11/2014 19:45:36]

Hardware
cisco MDS 9148S 16G 48 FC (1 Slot) Chassis ("2/4/8/16 Gbps FC/Supervisor")
Motorola, e500v2, core 0 with 4155776 kB of memory.
Processor Board ID JAE2117077F

Device name: MDS-A
bootflash: 4018896 kB
Kernel uptime is 2 day(s), 2 hour(s), 9 minute(s), 40 second(s)

Last reset
Reason: Unknown
System version: 6.2(9)
Service:

plugin
Core Plugin

Copiar al TFTP m9100-s5ek9-kickstart-mz.6.2.9.bin
MDS-A(config-vsan-db)# copy bootflash: tftp:
Enter source filename: m9100-s5ek9-kickstart-mz.6.2.9.bin
Enter hostname for the tftp server: 172.25.99.111
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
\
TFTP put operation was successful
Copy complete.

Copiar al TFTP m9100-s5ek9-mz.6.2.9.bin
MDS-A(config-vsan-db)# copy bootflash: tftp:
Enter source filename: m9100-s5ek9-mz.6.2.9.bin
Enter hostname for the tftp server: 172.25.99.111
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
/
TFTP put operation was successful
Copy complete.

Subir archivos del nuevo Firmware al MDS

Verificar si se dispone de espacio para poder subir los archivos.
MDS-A(config-vsan-db)# dir bootflash:
4096 Feb 17 09:30:53 2000 .partner/
0 Feb 17 09:32:38 2000 20000217_093238_poap_3306_init.log
1819 May 22 05:26:38 2017 20170522_052327_poap_3355_init.log
43493 Jul 04 14:23:37 2017 20170704_120012_poap_3350_init.log
4954 Jul 06 14:11:53 2017 MDS9148S-A-6-7-17.cfg
16384 Feb 17 09:23:17 2000 lost+found/
22309376 Feb 17 09:25:31 2000 m9100-s5ek9-kickstart-mz.6.2.9.bin
81847938 Feb 17 09:26:07 2000 m9100-s5ek9-mz.6.2.9.bin
1253 Jul 04 11:59:33 2017 mts.log
4096 Feb 17 09:32:26 2000 scripts/

Usage for bootflash://sup-local
310931456 bytes used
3094151168 bytes free
3405082624 bytes total

subir el fichero m9100-s5ek9-kickstart-mz.8.1.1.bin
MDS-A(config-vsan-db)# copy tftp: bootflash:
Enter source filename: m9100-s5ek9-kickstart-mz.8.1.1.bin
Enter hostname for the tftp server: 172.25.99.111
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP get operation was successful
Copy complete, now saving to disk (please wait)...

Ahora, subir el fichero m9100-s5ek9-mz.8.1.1.bin
MDS-A(config-vsan-db)# copy tftp: bootflash:
Enter source filename: m9100-s5ek9-mz.8.1.1.bin
Enter hostname for the tftp server: 172.25.99.111
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
-
TFTP get operation was successful
Copy complete, now saving to disk (please wait)...

Verificar actualización

Una vez subido los archivos verificar el proceso de actualización es correcto con el siguiente comando:
MDS-A(config-vsan-db)# show install all impact kickstart bootflash:m9100-s5ek9-kickstart-mz.8.1.1.bin system bootflash:m9100-s5ek9-mz.8.1.1.bin
Installer will perform impact only check. Please wait.

Verifying image bootflash:/m9100-s5ek9-kickstart-mz.8.1.1.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS

Verifying image bootflash:/m9100-s5ek9-mz.8.1.1.bin for boot variable "system".
[####################] 100% -- SUCCESS

Performing module support checks. [####################] 100% -- SUCCESS

Verifying image type.
[####################] 100% -- SUCCESS

Extracting "system" version from image bootflash:/m9100-s5ek9-mz.8.1.1.bin.
[####################] 100% -- SUCCESS

Extracting "kickstart" version from image bootflash:/m9100-s5ek9-kickstart-mz.8.1.1.bin.
[####################] 100% -- SUCCESS

Extracting "bios" version from image bootflash:/m9100-s5ek9-mz.8.1.1.bin.
[####################] 100% -- SUCCESS

Performing Compact Flash and TCAM sanity test.
[####################] 100% -- SUCCESS

Notifying services about system upgrade. [####################] 100% -- SUCCESS

Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive reset

Other miscellaneous information for installation:
Module info
------ ----------------------------------
1 FC ports 1-48 are hitless

Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-Version Upg-Required
------ ---------- ---------------------------------------- -------------------- ------------
1 system 6.2(9) 8.1(1) yes
1 kickstart 6.2(9) 8.1(1) yes
1 bios v2.1.17(01/08/14):v2.1.17(01/08/14) v2.1.17(01/08/14) no

Verificar incompatibilidades

Ahora podemos comprobar incompatibilidades con el siguiente comando:
MDS-A(config-vsan-db)# show incompatibility system bootflash:m9100-s5ek9-mz.8.1.1.bin
Checking incompatible configuration(s)
No incompatible configurations

Checking dynamic incompatibilities:
-----------------------------------

Instalación

Proceder a realizar la instalación ejecutando el siguiente comando:
MDS-A(config-vsan-db)# install all kickstart bootflash:m9100-s5ek9-kickstart-mz.8.1.1.bin system bootflash:m9100-s5ek9-mz.8.1.1.bin
Installer will perform compatibility check first. Please wait.

Verifying image bootflash:/m9100-s5ek9-kickstart-mz.8.1.1.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/m9100-s5ek9-mz.8.1.1.bin for boot variable "system".
[####################] 100% -- SUCCESS
Performing module support checks. [####################] 100% -- SUCCESS

Verifying image type.
[####################] 100% -- SUCCESS

Extracting "system" version from image bootflash:/m9100-s5ek9-mz.8.1.1.bin.
[####################] 100% -- SUCCESS

Extracting "kickstart" version from image bootflash:/m9100-s5ek9-kickstart-mz.8.1.1.bin.
[####################] 100% -- SUCCESS

Extracting "bios" version from image bootflash:/m9100-s5ek9-mz.8.1.1.bin.
[####################] 100% -- SUCCESS

Performing Compact Flash and TCAM sanity test.
[####################] 100% -- SUCCESS

Notifying services about system upgrade. [####################] 100% -- SUCCESS

Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive reset

Other miscellaneous information for installation:
Module info
------ ----------------------------------
1 FC ports 1-48 are hitless

Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-Version Upg-Required
------ ---------- ---------------------------------------- -------------------- ------------
1 system 6.2(9) 8.1(1) yes
1 kickstart 6.2(9) 8.1(1) yes
1 bios v2.1.17(01/08/14):v2.1.17(01/08/14) v2.1.17(01/08/14) no

Do you want to continue with the installation (y/n)? [n] y

Install is in progress, please wait.

Performing runtime checks. [####################] 100% -- SUCCESS

Notifying services about the upgrade. [####################] 100% -- SUCCESS

Setting boot variables.
[####################] 100% -- SUCCESS

Performing configuration copy.
[####################] 100% -- SUCCESS

Module 1: Refreshing compact flash and Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS

Upgrade can no longer be aborted, any failure will result in a disruptive upgrade.

Freeing memory in the file system. [####################] 100% -- SUCCESS

Loading images into memory. [####################] 100% -- SUCCESS

Saving linecard runtime state. [####################] 100% -- SUCCESS

Saving supervisor runtime state. [####################] 100% -- SUCCESS

Saving mts state. [####################] 100% -- SUCCESS

Rebooting the switch to proceed with the upgrade.
All telnet and ssh connections will now be temporarily terminated.

Verificar el nuevo Firmware

Ejecutar el siguiente comando para verificar que ya ha arrancado con el nuevo Firmware.
MDS-A# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2017, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
BIOS: version 2.1.17
loader: version N/A
kickstart: version 8.1(1)
system: version 8.1(1)
BIOS compile time: 01/08/14
kickstart image file is: bootflash:///m9100-s5ek9-kickstart-mz.8.1.1.bin
kickstart compile time: 4/30/2017 23:00:00 [05/02/2017 15:56:58]
system image file is: bootflash:///m9100-s5ek9-mz.8.1.1.bin
system compile time: 4/30/2017 23:00:00 [05/02/2017 18:51:48]

Hardware
cisco MDS 9148S 16G 48 FC (1 Slot) Chassis ("2/4/8/16 Gbps FC/Supervisor")
Motorola, e500v2 with 4088564 kB of memory.
Processor Board ID JAE2117077F

Device name: MDS-A
bootflash: 4018896 kB
Kernel uptime is 0 day(s), 0 hour(s), 16 minute(s), 54 second(s)

Last reset at 317793 usecs after Thu Jul 6 14:50:48 2017

Reason: Reset due to upgrade
System version: 6.2(9)
Service:

plugin
Core Plugin